Keystone Jack - Banana Jack w/Black Ring (Solder Type) - Ivory

Keystone Jack - Banana Jack w/Black Ring (Ivory)

Keystone Jack to be used with Keystone wall plates or panels.
Matches ivory wall plates.
Black plastic color code ring.
Front accepts banana plugs, spades or bare wire.
Back end has soldering post.

Keystone jacks and wall plates are used to create a cleaner, less cluttered media room when running wiring in-wall.

Banana plugs and jacks are used to terminate speaker wires.

*The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor. Individual pieces may also vary very slightly in color from each other.

Knowledge Base:

Question: Do you have any keystone banana jacks that I don’t have to solder?

Answer: Try this customer recommendation: The solder-only bit is very frustrating, but there is a fix for the problem (see my review)., After several hours of trying to solder my connections to the post, I figured out a better way to make this work. Partially unscrew the retaining nut from the back of the connection. Strip back about an inch of insulation from your speaker cable. Make a hook and thread it between the retaining nut and the plastic clip face. Tighten the retaining nut back down ensuring that a majority of the speaker wire is touching both the binding post and the nut. This works just as well as soldering without the headache. You should have no audible anomalies. If so, double-check your connections and adjust as necessary.