Here' an attractive, durable and verstile mount for your flat panel display. The tilt and slide mechanism with screw and lever locks almost has a "steam punk" look to it. The device is recommended for screens up to 30" and 66 lbs. The mount is made from steel and has a nice powder coat finish.

The mount allows you to tilt the display up and down about 35 degrees off center max. You can swivel it side to side up to 50 degrees off center max. And, it will retract down to a depth of 3.25" when parallel and even to the wall and extend out to a maximum of about 5.75".

It will support any display within the weight limit that has a VESA 75 or 100 compliant mounting pattern. (Vesa 75 is a square hole pattern where each hole is about 3" apart vertically and horizontally. Vesa 100 has holes that are about 4" apart.)

IMPORTANT! Please note that the screen sizes listed are only approximations. The VESA pattern used to mount the display and the weight of the display are the primary indicators of whether a given display and mount are compatible. Please check the VESA pattern listed in your product manual to ensure that this mount will work with your display.

SPECIFICATIONS

Model # LCD-601S BLACK

Type LCD Wall mount

Minimum VESA 75 x 75

Maximum VESA 100 x 100

Maximum Weight 66 lbs

Minimum Req. Display Size 10"

Maximum Req. Display Size 30"

Minimum Extension 3.25"

Maximum Extension 5.75"

Tilt Range 30 degrees

Swivel Range 60 degrees

Construction Steel

Color Black

Wall Plate Dimensions 5.1" X 2.7"

Front Plate Dimensions 4.7" X 4.7"

Built In Level NO

Cable Management NO

Notes:    

  Mounting Hardware Included:  4 lag bolts and 4 optional concrete anchors.  Machine screws for mounting to panel are not included.

Please watch our video for installation guidelines: http://www.youtube.com/watch?feature=player_embedded&v=N00a6gaSnl8