Monoprice HDMI Extender Using Cat5e or CAT6 Cable - Extend Upto 98ft

Details

Use this simple and effective HDMI; extender to send High Speed (1080p) HDMI® signals up to 30 meters (98 feet) over Cat5e/6 cable!

Most extenders are small boxes, which must be mounted and which require additional cables to use. While they can usually handle longer distances, if you don't need to take the signal more than 30 meters, this simple pair of extender adapters is the right solution.

Each adapter plugs into your HDMI® ports, with the sender in the source device and the receiver at the display. Then just run a pair of Cat5e/Cat6 cables between the adapters and you're in business! You won't need to provide external power - it gets the power it needs from the HDMI® source device.

The adapters support up to 1080p resolutions and digital audio, including DTS® Digital, DTS-HD Master Audio™, and Dolby TrueHD™. They support up to 8-bits per channel (24-bit total) Deep Color and HDCP pass-through.

Note: The packaging for this extender is improperly printed and erroneously identifies this device as a 1x2 Splitter. This is in fact an HDMI® extender over Cat5e/6 cable and not a splitter device. Updated packaging is on order and this will be corrected as soon as possible. We apologize for any inconvenience or confusion this may cause.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

Additional Information

SKU 8121
Length No
Color No
Gauge No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.