Welcome to Cables on Sale!

Your Shopping cart is empty.

Skip to Main Content »

Monoprice - 6-1/2 Inches Polypropylene 2-Way In-Wall Speakers (Pair) - 40W Nominal, 80W Max.

    • The product Monoprice 0.5FT 24AWG Cat6 550MHz UTP Ethernet Bare Copper Network Cable - Green has been added to comparison list.
    • The product Monoprice 3ft MFi Certified Lightning to USB Charge/ Sync Cable for iPad, iPhone, and iPod - Black has been added to comparison list.

Details

6-1/2 Inches Polypropylene 2-Way In-Wall Speakers (Pair) - 40W Nominal, 80W Max.

Polypropylene, next to paper, is probably one of the most popular materials used for speaker driver construction. It offers many benefits over paper including being extremely light weight, while being resistant to moisture and mildew. On the sonic front, it is a softer material and although not quite as precise as more rigid materials like Kevlar is less prone to sonic breakup distortion at the crossover points. Because of it's natural tendancy to dampen breakup at the frequency extremes you get a smoother transition at the crossover. This results in a more mellow and less tinny sound than you would normally get from other types of speakers.

Features:

• Precision molded, moisture resistant, polypropylene cone woofers with rubber surrounds for well defined mids and bass.
• Titanium Silk Membrane Dome Tweeters for sweeter highs and pure sonic clarity.
• Advanced, high capacity crossover network.
• Pivoting tweeters allow you to point the acoustics to the prime listening position for a more accurate and immersive sonic experience.
• Adjustable Crossover switch allows you to match the speakers to the sonic characteristics of your listening environment and the location in which you place them.
• 40W Nominal and 80W Maximum Power Capacity.
• 8 Ohms Standard Impedance ensure they can be safely driven by even the most modest home theater receivers.

Please note that this video shows the specific instructions for installation of PID 4101. However, it is representational of the steps, tools, and types of procedures that would be used for the installation of any in-wall or in-ceiling speaker and is included on this page for reference purposes only. Please refer to the installation instructions of the in-wall or in-ceiling speaker you have for the specific dimensions and installation procedures.

Note that the price listed in the video was the price for PID 4101 at the time the video was made. Prices can fluctuate up and down based on production costs and the value of the US$ against foreign currencies

Specifications:

Impedance: 8 Ohms
Frequency Response: 65Hz - 20,000 Hz
Power Handling Capacity: 40 Watts Nominal, 80 Maximum
Woofer: 6.5" PolyPropalene Cone Woofer w/ 10oz Magnet and rubber surrounds.
Tweeter: 1" Titanium Silk Membrane Dome (Pivoting)
Sensitivity: 87 +/- 2db (1.0M/2.83V)
Crossover: 24dB per Octave (with -3, -6 dB Switch)
Cut-Out Dimensions: 10.71" (Length) x 7.32" (Width)
Overall Dimensions: 12" (Length) x 8.7" (Width)
Mounting Depth: 3"

Contents:

2 - 6.5" 2-way In-Wall Speaker w/ grill
1 - Installation instructions
1 - Cutout template and paint mask
1 - Grill removal tool
1 - Grill putty

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

Knowledge Base:

Question: How do I install these speakers in the wall or ceiling?

Answer: There are clips that secure it to the wall or ceiling boards. You don't need any additional box or bracket. You simply cut out a hole in the wall or ceiling with the template provided, insert the speakers and when you turn the mounting screws located on the face of the speakers underneath the grills, the clips will engage and secure the speaker in place.

Question: Can I use these speakers as an LCR (left/center/right) or used a match set for all my surrounds, or is it better to have specific types of speakers for specific locations.

Answer: Opinions will vary even among experts about the proper type of speaker to use. The bottom line is choose what suites your needs and tastes best.

Some of the arguments are as follows:

Using match speakers all around make it a lot easier to match the timber and tonal balance across a sound-stage and around your room. This prevents a character in a movie who walks from one side of the room to another from sounding like Mike Tyson on one side and then James Earl Jones and back to Mike.

On the other hand. Most dialog comes from the center channel of a system in order to anchor the voices to the screen. The human voice tends to represent the upper mid bass frequencies, so dedicated center channels will have dual woofer cones to better produce this range of frequencies. Since dialog can easily be drowned out by ambient noises in the soundtrack, this helps to keep dialog clear and understandable.

Question: There is insulation behind my wall. Is it safe to install the speaker without a box?

Answer: In-wall speakers are designed with the possibility of insulation in mind. The insulation will not harm the speakers or create any hazard. Even regular box speakers have insulation in side them to reduce the effects of standing sound waves.

Question: Can I put an in-wall speaker in the ceiling or an in-ceiling speaker into the wall?

Answer: You can put an in-wall speaker into a ceiling however, because of the mounting depth of the speakers, you can not usually fit an in-ceiling speaker into a wall.

Question: How do you set the crossover switch (0, -3db, -6db)?

Answer: The cross over switch allows you to better match the in-wall speakers to the wall you are installing them into by adjusting the roll off between the drivers. Standard non-in-wall speakers come in boxes that are optimized for the speaker and the crossovers are tuned for that specific enclosure. In-wall speakers use the space between the walls as it's enclosure. Since different wall spaces will vary in volume, construction, insulation, etc, a particular in-wall speaker will sound different in different walls. The switch allows you to adjust and optimize the sonic characteristics of the speakers to best match the wall you are installing them into. Set the switch to the setting that gives you the best sounds once they've been installed.

Additional Information

SKU 4618 - GRG
Length (ft) No
Color No
Gauge No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.