High speed, Cat6 grade, easy to use, modular RJ45 Keystone jack. 110 type IDC. 90 degree connection. To be used with keystone wall plate or panel. Wiring diagram next to wire clips.

Note that the width of the RJ45 keystones is such that two cannot be used side-by-side in the same wall-plate.

See the following link for an installation guide: http://www.monoprice.com/manual/How%20to%20-%20Punchdown%20keystones.pdf

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, improvements and physical design changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown.

*The color indicated can vary in tone and/or hue between production runs and manufacturing facilities. The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor. Individual pieces may also vary very slightly in color from each other.

Question: Whats the difference between Cat 5, Cat 5e and Cat 6? Can I use one in place of another?

Answer: The difference is in the bandwith ratings. Cat 5e has a higher bandwidth than Cat 5. Cat 6 has a higher rating than Cat 5e. brbrThey all use RJ45 connectors and are usually interchangeable depending on the bandwidth requirements of your devices.

Question: Whats the difference between T568A and T568B?

Answer: The main difference between these two wiring standards is the pinout configuration. T568B is the more common of the two in the U.S.brbrFor patch cables, you will need have the same pin configuration on both ends of the cable regardless of which standard you choose to use. brbrIf you need to make a crossover cable, you need to configure one end as T568A and the other end as T568B.br

Question: Can you use CAT6 connectors on a CAT5 cable or visa versa?

Answer: Yes, but you don''''''''t get the added benefits of CAT6 by crossing connectors and cables.

Question: Will your keystones fit wallplates and jack panels from other manufacturers?

Answer: Our Keystones are a standard size and configuration so they should fit plates and panels from any manufacturer designed with standard keystone sized holes.

Question: Do you sell ethernet keystones that don''''''''t require cutting and wiring my own cables?

Answer: We have coupler type keystones for Cat5e and Cat6. Try PID# 1073 or 2888