Adjustable Tilting/Swiveling TV Wall Mount Bracket for LCD LED Plasma (Max 200 lbs, 42~63 inch)

Don't leave your flat panel TV on a table or stand where it can be knocked over and damaged, or even worse injure a child or pet. Instead, mount it securely and safely to the wall using this Adjustable Tilting/Swiveling Wall Mount Bracket from Monoprice!

This mount bracket supports adjustments in three dimensions; it can be swiveled ±90° and can be tilted up to 5° upward and 15° downward. Additionally, it can be extended from a minimum distance to the wall of 4.0" to a maximum of 31.0". It also features cable management clips to help keep your installation clean and professional looking.

This bracket is designed to mount an LCD, LED, or Plasma display with a VESA mounting pattern of 200x200 or between 400x300 and 800x500, which includes most 42" to 63" displays*. It can be mounted to any type wall (brick, concrete, wood stud, etc.) and can safely hold up to 200 lbs (including the weight of the mount itself). Mounting hardware is included.

* Note that the display screen size is only an approximation. Your display is compatible with this mount as long as it has a VESA mounting pattern and weight that fit within the size and weight limits listed above.

 

Support Files:

User's Manual (Jul 30, 2010)

Dimensions Diagram (Feb 2, 2012)

 

Please watch our video for installation guidelines:

 

 

Specifications

Model # 5920

Type Tilting/Swiveling

Minimum VESA 200 x 200/320 x 300

Maximum VESA 800 x 500

Maximum Weight 200 lbs

Minimum Display Size 42"

Maximum Display Size 63"

Minimum Extension 4.0"

Maximum Extension 31.0"

Tilt Range +5/-15 degrees

Swivel Range ±90 degrees

Rotation Range N/A

Construction Steel

Color Black

Wall Plate Dimensions 18.0" x 10.0"

Front Plate Dimensions 31.6" x 21.6"

Built In Level No

Cable Management Yes

UL Certified No

RoHS Compliant Yes Notes: does not fit 300x300

Knowledge Base return to top

Adjustable Tilting/Swiveling TV Wall Mount Bracket for LCD LED Plasma (Max 200 lbs, 42~63 inch)

 

Question: I''ve heard that the lag bolts break easily. Has that issue been resolved?

Answer: Yes, we have reviewed and tested the lag bolts that are shipped with the mounts and made replacements where we thought improvements were possible. The included lag bolts should be just as reliable as those found in a retail hardware store. However, we have also found that a majority of the snapped bolts were due to lack of or insufficient pilot holes being pre-drilled into the studs prior to installation. Pilot holes of adequate diameter to a depth equal to the length of the bolt should be drilled. If the pilot holes are too shallow, they will cause the bolt to over-torque and snap. This can and will happen with any grade of lag bolt.ed.