You have no items in your shopping cart.
Speaker Volume Controller RMS 75W (Rotary Type) - White
This is a rotary-type wall plate volume control for speaker systems with power ratings of up to 50 watts per channel and impedance ratings of 4 to 16 ohms. This rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.
The wall plate mounts into a standard single-gang, low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14 to 16 gauge and provides a frequency response range of 35 Hz to 20 kHz (+0/-2db) at the full power rating of 50 watts per channel.
Please note: This volume control does not include a wall mounting bracket.
Support Files:
-
-
- User's Manual (Aug 11, 2011)
-
-
Specifications:
Specifications Input 2 channels, 75 watts per channel Output 2 channels, 4 to 16 ohms impedance matching Frequency Response 35 Hz to 20 kHz (+0/-2 db) at rated power Wire gauge 14 to 16 AWG Material Plastic ABS Depth 2 3/4" When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier. This is done by setting the jumpers on the volume control to compensate for the number of speakers you have in a parallel configuration and the impedance level of the speakers.
If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes - just leave the jumper in the default x1 position. However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control.
Note that for any speakers wired in series, the overal impedance level is the sum of each speaker. So two 4 ohm speakers wired in series is the same impedance as a single 8 ohm speaker.
Impedance Correction Chart Speaker
ImpedanceAmplifier
RatingJumper Setting /
# of Speaker Pairsx1 x2 x4 x8 4 ohm speakers 2 ohms 2 pairs 4 pairs 8 pairs 16 pairs 4 ohms 1 pair 2 pairs 4 pairs 8 pairs 8 ohms n/a 1 pair 2 pairs 4 pairs 8 ohm speakers 2 ohms 4 pairs 8 pairs 16 pairs 32 pairs 4 ohms 2 pairs 4 pairs 8 pairs 16 pairs 8 ohms 1 pair 2 pairs 4 pairs 8 pair 16 ohm speakers 2 ohms 8 pairs 16 pairs 32 pairs 64 pairs 4 ohms 4 pairs 8 pairs 16 pairs 32 pairs 8 ohms 2 pairs 4 pairs 8 pair 16 pairs Video:
| SKU | 8245 - S2-7 |
|---|---|
| Length (ft) | No |
| Color | No |
| Gauge | No |
| Type of Boot | N/A |
| Brand | N/A |
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.